SensorNode Bluetooth®

blue background
Get in Touch SensorNode Bluetooth®

Battery Powered Bluetooth® Sensor Device in an IP67 housing


The SensorNode Bluetooth® is a battery powered, Bluetooth enabled sensor device that interfaces to a range of sensors and inputs.

Check out our Tracking with Bluetooth Guide to quickly get up to speed on how Digital Matter devices leverage their Bluetooth functionality to open up new possibilities!

The SensorNode Bluetooth wirelessly transmits its data to other Bluetooth enabled devices.
It is designed to be paired with other Bluetooth enabled devices in the Digital Matter range such as the Remora2, as well as the upcoming G120 and Eagle

A pending app update will allow mobile phones installed with the Telematics Guru App to receive data from the SensorNode and report it to the server. 

The ubiquitousness of Bluetooth leads to an array of exciting potential applications. The SensorNode is able to be integrated into 3rd platforms or apps if desired. Contact us today for more information about 3rd party support.

How does it operate?

The SensorNode Bluetooth can be easily attached to whatever you would like to monitor. It can be hardwired to permanent power, or powered by 3 x AA batteries if power is not available. It will last for up to 4 years on just a single set of batteries!

The SensorNode will send a beacon with its data every few seconds, and 'Bluetooth Gateway' devices like the Remora2, or even a moblie phone will receive data when they are within range. 

The SensorNode is low cost and many can be placed around an area, with a single, relatively more expensive Bluetooth Gateway device acting as the conduit to pass their data to the server. This enables a low cost monitoring solution.

Some Applications



Ease of installation

Ease of installation

Sensor Monitoring

Sensor Monitoring

Rugged and Weatherproof

Rugged and Weatherproof

  • Hardware Features

    Low-profile IP67 rugged housing

    The IP67 rated housing is made of sturdy ABS/Polycarbonate plastic to survive bumps and knocks and to survive many years in the sun and weather. It is low-profile and caters for a number of cable glands to allow for waterproof cable entry to the housing. The housing screws together for easy assembly, and has convenient mounting tabs.


    L 135 x W 90 x H 35 mm

    Operating Temperature

    -20°C to +60°C1

    1 For operation in extreme temperatures the device must be fitted with lithium batteries

    Multiple Power Options

    Line Power

    4-6 V Line Power enables the SensorNode to be powered by a USB 5V wall socket if permanently installed in a location with power.

    3 x AA Batteries

    3 x AA 1.5V Batteries - Alkaline or Lithium, user replaceable and readily available.

    Up to 4 years battery life with Lithium, 3 years Alkaline

    *Power not internally switched, only one power input (battery or line) can be used at a time


    BLE 4.2 as standard
    BLE 5 Optional (future release)


    BLE 4.2 - up to 100m
    BLE 5 - Up to 700m (+19dBm option)

    Inputs and Interfaces

    Digital Inputs

    2 x Digital Inputs, configurable pull-up/pull-down

    Analog Inputs

    2 x 0-30V Analog Inputs with auto-ranging
    Built-in battery voltage monitoring

    I2C Interface

    I2C (inter-IC communications) is an interface commonly used in sensor modules. This allows the SensorNode to talk to a wide range of sensors including: temperature, humidity, vibration, CO2 gas and many others. Contact Digital Matter about sensor support.

  • download icon DOWNLOAD THE DATASHEET

    For support and documentation please visit our online Knowledge Base:

    Digital Matter Knowledge Base