Compact rugged IP67 rated housing
Made of sturdy Nylon/Glass composite plastic the housing is extremely tough and UV resistant, is resistant to oils and can easily handle high temperatures.
The housing is sealed using 4 screws and has 2 convenient mounting tabs.
Dimensions: 125mm x 80mm x 25mm
Weight: 250 grams
8V to 36V DC (max)
The G62 passes stringent automotive power “load dump” tests to ensure that it will continue to operate in the harshest electrical systems. A built-in self-resetting fuse makes installation easy and safe.
On external power.
-20°C to +60°C
Below 0°C the standard internal backup battery’s ability to deliver sufficient power to operate the cellular modem is reduced. Below 0°C and above +45°C the internal backup battery will not be charged as a safety precaution due to dangers associated with charging batteries at extreme temperatures.
For battery powered tracking in extreme temperatures enquire about our Remora tracker with extended temperature range battery options.
High sensitivity GPS
- UBLOX EVA-M8 GPS module
- Supports GLONASS and other GNSS systems
- 72 channel high sensitivity receiver
- -167dBm industry leading tracking performance
- Battery back up for optimal hot-start performance
- AssistNow Offline aiding data for extremely fast time-to-first-fix and performance in urban canyon environments
Low noise GPS amplifier
GPS signals are boosted by a special low-noise amplifier (LNA). This allows the G62 to operate where other units will fail to receive GPS signal.
2G or 4G Cat-M1 / NB-IoT
The 4G modem allows for communication on either Cat-M1 and NB-IoT networks, both specifically developed for the demands and constraints of IoT applications. These networks offer extended range, improved building penetration and low power usage.
The G62 can also be manufactured with a 2G modem for specific markets around the world.
Internal GPS and cellular antennas.
Having the antennas inside the housing makes for very simple and quick installation. The G62 has had its antennas tuned by the top laboratories to ensure optimal performance.
The standard 850mAh LiPo backup battery allows the G62 to operate when external power is removed for up to 7 days, depending on the amount of movement.
3 x Digital Inputs
- 1 x Ignition line
- 2 x digital inputs with configurable pull-up / pull-down
- Numerous configuration options including switches and duress/panic alerts
1 x Analog Input
0 - 30V analog input
*Shared with digital output, meaning only 1 can be used at a time
1 x Digital Output
1 x switched ground digital output, easily wired up to switch external lights, relays, buzzers, sirens, motors and other devices. Outputs can be used to immobilise a vehicle.
*Shared with analog input, meaning only 1 can be used at a time
3 Axis Accelerometer
The 3 axis accelerometer allows the G62 to detect harsh driving events (harsh acceleration, braking and cornering) and this information can be used to monitor driver behaviour and unsafe driving. It also allows the G62 to go to ‘sleep’ when not moving, resulting in extremely low standby current.
Communicate with common one-wire iButton devices (for Driver ID)
The G62 has sufficient memory to store over 50,000 records in its flash memory. Normally the data will be sent to the server immediately but if the device is out of range then there is sufficient space to ensure that no data is lost – for many weeks of driving!
The flash memory is also used to store parameters, GPS aiding data, accident data, driver lists and other important information that needs to be securely stored.
One year manufacturer’s warranty.