CONNECTIVITY
The Bolt OBD is available in either 2G or 4G LTE-M / NB-IoT.
| 2G |
2G: SARA-G350-02S-01
850/900/1800/1900 MHz |
| 4G LTE-M / NB-IoT |
uBlox SARA-R410M Modem operates on all major global LTE-M and NB-IoT bands.
Supported LTE bands: 1*, 2, 3, 4, 5, 8, 12, 13, 18, 19, 20, 26*, 28 (*roaming bands) |
| SIM Size & Access |
Internal Nano 4FF SIM |
LOCATION
| Module |
uBlox EVA-M8 |
| Constellation |
Concurrent GPS / GLONASS |
| Channels |
72 Channel High Sensitivity Receiver |
| Tracking Sensitivity |
-167dBm industry-leading tracking performance |
| AssistNow Offline |
GNSS aiding data (such as ephemeris, time, coarse position) for a faster Time To First Fix (TTFF). |
| Low Noise Amplifier |
GPS signals are boosted by a unique low-noise amplifier (LNA) allowing operation where other units fail. |
POWER
| Input Voltage |
8-36V DC (max). OBDII connector draws power from vehicle’s OBD port. |
| Self-Resetting Fuse |
Built-in self-resetting fuse makes installation simple and safe. Stringent automotive power “load dump” tests are conducted to ensure operation in the harshest electrical systems. |
| Operating Current |
~25/50mA when moving |
| Sleep Current |
<1mA |
MECHANICS / DESIGN
| Dimensions |
71 x 46 x 24 mm (2.8 x 1.81 x 0.94″) |
| Weight |
48 g (1.69 oz) |
| Housing |
ABS Polycarbonate Plastic |
| Operating Temperature |
-20°C to +60°C |
| Installation |
OBDII standard connector draws power from the OBDII port to operate. |
| GPS Antenna |
Internal |
| Cellular Antenna |
Internal |
| 3-Axis Accelerometer |
3-Axis Accelerometer to detect movement, high G-force events, and more. |
| Diagnostic LED |
Diagnostic LED signifies operation status. |
| Flash Memory |
Store weeks of records if device is out of cellular coverage. Storage capacity for over 10 days of continuous 30-second logging. |
SMARTS
| Auto-APN |
Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware. |
| Accident & Rollover Detection |
Configure accident and rollover alerts triggered by extreme changes in velocity and orientation of vehicle or equipment. Second-by-second GPS data is saved on the device’s flash memory, with a capacity of approximately 2 hours of data. In the event of an accident, a subset of the data (60 seconds before / 10 seconds after) is uploaded to the server automatically (if configured) or can be requested manually for a detailed reconstruction of the incident. |
| Driver Safety & Behavior |
Monitor speeding, harsh acceleration, braking, cornering, idling, and more to improve safety and prevent unnecessary wear on vehicles. |
| Geofencing |
Create custom geofences and alerts if an asset enters or leaves specific locations. |
| Preventative Maintenance |
Set reminders based on distance traveled and run hours to reduce maintenance and repair costs. |
| Real-Time Tracking |
Device remains continuously connected while on the move for real-time asset tracking. |
Theft Recovery
|
Switch to Recovery Mode in the case of theft or loss to activate real-time tracking at 30-second intervals for asset retrieval. |
| Run Hour Monitoring |
Calculate run hours and distance traveled (odometer) to understand and optimize asset utilization. |
DEVICE MANAGEMENT
| Flexible Configuration |
Configure device parameters such as heartbeat rate, movement and accelerometer settings, and more to fit any tracking application. |
| OEM Server |
Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system. |
INTEGRATION
SECURITY
| Data Security |
Military-level AES-256 Encryption from device to OEM Server to protect the integrity and confidentiality of telematics data.
Data forwarded to third-party systems is sent via HTTPS for end-to-end security. |
WARRANTY
| Manufacturer’s Warranty |
One year manufacturer’s warranty. |
CERTIFICATIONS
| Please contact us for a full list of compliance specifications and documentation for your region. |
4G – FCC, ISED, CE (DoC)
2G – ICASA, CE (DoC) |
