Oyster2

Tech Specs

CONNECTIVITY

The Oyster2 is available in either Cellular 2G or LTE-M / NB-IoT

2G 2G: SARA-G350-02S-01
850/900/1800/1900 MHz
LTE-M / NB-IoT ublox AG SARA-R410M-02B Modem operates on all major global LTE-M and NB-IoT bands.
Supported LTE bands: 1*, 2, 3, 4, 5, 8, 12, 13, 18, 19, 20, 25, 26*, 28 (*roaming bands)
SIM Size & Access Internal Micro 3FF SIM

 

BATTERIES

User-Replaceable Batteries 3 x AA
Battery Life Up to 7 years of battery life at once-daily position updates, 1 year battery life at once-hourly position updates. Enable intelligent movement-based tracking for longer battery life. Battery life estimates based on LTE-M connectivity.
Supported Battery Types Lithium (LiFeS2)
Lithium Thionyl Chloride (LTC)
*Please dispose of Lithium batteries in a safe and responsible manner

 

LOCATION

Module ublox EVA-M8
Constellation Concurrent GPS / GLONASS
Channels 72 Channel High Sensitivity Receiver
Tracking Sensitivity -167dBm industry-leading tracking performance
GNSS Assistance GNSS almanac data for greater sensitivity and position accuracy
Low Noise Amplifier GPS signals are boosted by a unique low-noise amplifier (LNA) allowing operation where other units fail
Cell Tower Location Cell tower fallback for positioning when GPS fails

 

POWER

Input Voltage 5-16V DC
Sleep Current <10uA*
*Average current in lowest power configuration

 

MECHANICS / DESIGN

Dimensions 108 x 86 x 31 mm (4.25 x 3.39 x 1.22″)
Weight 194 g (6.84 oz)
Housing Ultra-Rugged Nylon Glass
IP Rating IP67 rated housing ensures device can withstand fine dust, high-pressure spray, submersion for 30 mins in 1m of water, and extreme temperatures
Installation Compact and concealable. Multiple installation options for covertly and easily securing the device to assets with screws, bolts, cable ties, rivets, and more.
Operating Temperature -20°C to +60°C
For operation in extreme temperatures use LTC Batteries
GPS Antenna Internal
Cellular Antenna Internal
RF Antenna Internal
3-Axis Accelerometer 3-Axis Accelerometer to detect movement, high G-force events, and more
Diagnostic LED Diagnostic LED signifies operation status
Flash Memory Store weeks of records if device is out of cellular coverage. Storage capacity for over 10 days of continuous 30-second logging.
On-Board Speed and Heading Current speed and heading is reported with each position update
On-Board Temperature The device reports internal temperature which provides an indication of ambient temperature but may not always be precise

 

SMARTS

Auto-APN Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware
Battery Life Monitoring Built-in Battery Meter for monitoring battery use and remaining life predictions
Geofence Alerts The server can use device location to create geofences and alerts if an asset enters or leaves designated locations
Geofence Download to Device Geofences can be downloaded directly to the device from Telematics Guru for enhanced location-based actions and alerts.
Maximum of 100 Geofences with up to 100 points per geofence.
Impact Detection Configure impact-detection alerts when G-forces are exceeded by a user-defined threshold
Periodic or Movement-Based Configure parameters to send updates based on set time intervals or when movement occurs. Adaptive tracking technology detects when the device is on the move and increases the update rate, providing detail when you need it while conserving battery when stationary.
Preventative Maintenance Set reminders based on distance traveled and run hours to reduce maintenance and repair costs
Run Hour Monitoring Capture run hours based on movement to understand and optimize asset utilization
Sleep Mode Stationary devices enter sleep mode until movement occurs to conserve battery life and optimize data usage
Theft Recovery Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval
Tilt Detection 1-axis angle reporting, tip detection, and rotation counting

 

DEVICE MANAGEMENT

Flexible Configuration Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application
OEM Server Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system

 

INTEGRATION

Third-Party Integration TCP Direct or HTTPS Webhook

 

SECURITY

Data Security Military-level AES-256 Encryption from device to OEM Server to protect the integrity and confidentiality of telematics data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security.

 

WARRANTY

Manufacturer’s Warranty One year manufacturer’s warranty

 

CERTIFICATIONS

Please visit our knowledge base for a full list of compliance specifications and documentation for your region LTE-M / NB-IoT – FCC, ISED, ACMA (DoC), PTCRB, AT&T, VERIZON, CE (DoC), Environmental Testing (Temperature, Shock, Vibration)
2G – ICASA, CE (DoC)

 

Last Updated: July 28, 2021 

Let’s Get Started

Fill out the form below to discuss Digital Matter solutions, pricing and availability in your region.