Oyster3 Bluetooth®

Tech Specs

This device is designed, developed, and manufactured by Digital Matter

CONNECTIVITY

The Oyster3 Bluetooth is available in LTE-M/NB-IoT

LTE-M / NB-IoT
(supports roaming between networks – roaming SIM required)
Nordic nRF9160 Modem operates on all major global LTE-M and NB-IoT bands.
Supported LTE bands:
LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B66
NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66
Bluetooth® 5.2 Gateway Bluetooth 5.2 gateway reports nearby Bluetooth tags and sensors for affordable tagged asset management and sensor monitoring
SIM Size & Access Internal Nano 4FF SIM

 

BATTERIES

User-Replaceable Batteries 3 x AA. Batteries not included.
Supported Battery Types Lithium (LiFeS2)
*Please dispose of Lithium batteries in a safe and responsible manner
*Battery Life Estimates Once Daily location updates – 10+ years
Movement-Based location updates – 6+ years
Hourly location updates – 3.5+ years

*Battery life estimates are influenced by several factors including temperature, installation and orientation of the device, the frequency of location updates, network coverage, sensor integrations, peripherals, accelerometer settings, and more. Battery life calculators are available at support.digitalmatter.com.

 

LOCATION

GNSS Module Sony CXD5612
Constellation Concurrent GPS, GLONASS, Galileo, QZSS, Beidou
Tracking Sensitivity -149 dBm cold start / -163 dBm hot start
*Location Accuracy ~1m 2D RMS, GPS, -130dBm
GNSS Assistance GNSS almanac and ephemeris data for greater sensitivity and position accuracy
Low Noise Amplifier GPS signals are filtered and boosted by a SAW filter and low-noise amplifier (LNA) allowing operation where other units fail
Cell Tower Location Cell tower location fallback for positioning when GPS can’t get a fix

*Positioning accuracy specifications are provided by the GNSS supplier and reflect ideal conditions. Device configuration, installation, environmental conditions, augmentation services, and many other factors may lead to variations in positioning accuracy.

 

POWER

Input Voltage 3 V – 5.5 V DC
Sleep Current <10uA*
*Average current in lowest power configuration
Safety Reverse Polarity Protection

 

MECHANICS / DESIGN

Dimensions 108 x 86 x 30 mm (4.25 x 3.39 x 1.18″)
Weight 173g
Housing Non-branded housing for optional white-labeling
IP/IK Rating Ultra-rugged and waterproof IP68 and IK07-rated housing ensures the device can withstand impact, fine dust, and brief submersion
Installation Compact and concealable. Multiple installation options for covertly and easily securing the device to assets with screws, bolts, cable ties, rivets, and more. Stainless steel screws provided.
Operating Temperature -30°C to +60°C
Cellular Antenna Internal
GPS Antenna Internal
3-Axis Accelerometer 3-Axis Accelerometer to detect movement, high G-force events, and more
Diagnostic LED Diagnostic LED indicates operation status
Flash Memory Store weeks of records if device is out of cellular coverage. Storage capacity for 20 days of continuous 2-minute logging.
On-Board Speed and Heading Current speed and heading is reported with each position update
On-Board Temperature The device reports internal temperature which provides an indication of ambient temperature but may not always be precise

 

SMARTS

Auto-APN Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware
Battery Life Monitoring ‘Battery Low’ and ‘Battery Critical’ alert levels
Geofence Alerts The server can use device location to create geofences and alerts if an asset enters or leaves designated locations
Geofence Download to Device Geofences can be downloaded directly to the device for enhanced location-based actions and alerts. Maximum of 500 Geofences with up to 100 points per geofence.
Impact Detection Configure impact-detection alerts when G-forces are exceeded by a user-defined threshold
Intelligent Power Management Early registration abort saves power when out of cellular coverage
Periodic or Movement-Based Tracking Configure parameters to send updates based on set time intervals or when movement occurs. Adaptive tracking technology detects when the device is on the move and increases the update rate, providing detail when you need it while conserving battery when stationary.
Preventative Maintenance Set reminders based on distance traveled and run hours to reduce maintenance and repair costs
Rotation Counting Keeps a count of the number of rotations of the device about the Z axis
Run Hour Monitoring Capture run hours based on movement to understand and optimize asset utilization
Sleep Mode Stationary devices enter sleep mode until movement occurs to conserve battery life and optimize data usage
Theft Recovery Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval
Tip Detection Define a range of angles that constitutes a ‘tipped’ state and configure alerts

 

DEVICE MANAGEMENT

Flexible Configuration Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application
Device Management Platform Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system
Configuration App Configurable with DM-Link provisioning tool

 

INTEGRATION

Third-Party Integration TCP Direct or HTTPS Webhook

 

SECURITY

Data Security Military-level AES-256 Encryption from device to Device Manager to protect the integrity and confidentiality of telematics data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security.

 

WARRANTY

Manufacturer’s Warranty Two-year manufacturer’s warranty. Exclusions apply.

 

CERTIFICATIONS

Please see our knowledge base for device certifications

 

 

DIMENSIONS

 

 

An Oyster for Every Asset

There are several variations of the Oyster battery-powered IoT asset tracking device available to best fit your application:

Oyster3 GPS – Outdoor asset tracking
– Oyster3 GPS and Bluetooth Gateway – Outdoor asset tracking and BLE tag and sensor monitoring
Oyster Edge – Indoor/Outdoor asset tracking with Cloud-based Location Solving and BLE tag and sensor monitoring
Oyster3 LoRaWAN – Outdoor asset tracking on LoRaWAN® Networks

Let’s Get Started

Submit the form below to get in touch with a Digital Matter representative from your region.

 

Looking for support? Check out our knowledge base.

Information on becoming a Digital Matter Partner.

Information on pricing, availability, and proof of concept.

Guidance on selecting the right products for your application.