Yabby WiFi

Tech Specs

CONNECTIVITY

The Yabby WiFi is available in either Cellular 2G or LTE-M / NB-IoT.

2G 2G: SARA-G350-02S-01
850/900/1800/1900 MHz
LTE-M / NB-IoT uBlox SARA-R410M Modem operates on all major global LTE-M and NB-IoT bands
Supported LTE bands: 1*, 2, 3, 4, 5, 8, 12, 13, 18, 19, 20, 26*, 28 (*roaming bands)
SIM Size & Access Internal Nano 4FF SIM

 

BATTERIES

User-Replaceable Batteries 3 x AAA
Battery Life Up to 6.5 years of battery life at once-daily position updates. Enable intelligent movement-based tracking for longer battery life. Battery life estimates based on LTE-M connectivity.
Supported Battery Types Lithium (LiFeS2)
*Please dispose of Lithium batteries in a safe and responsible manner

 

LOCATION

Cell Tower Location Cell tower fallback for positioning when there is no WiFi signal
WiFi Positioning Indoor asset location using Wifi access point scanning

 

POWER

Input Voltage 4-6V DC
Sleep Current <10uA*
*Average current in lowest power configuration

 

MECHANICS / DESIGN

Dimensions 85 x 63 x 24 mm (3.35 x 2.48 x .94″)
Snap Housing (Smallest Size, not IP67 rated) – 75 x 45 x 25 mm (2.95 x 1.77 x 0.98”)
Weight 96 g (3.39 oz)
Housing ABS Polycarbonate Plastic
IP Rating IP67 rated housing ensures device can withstand fine dust, high-pressure spray, submersion for 30 mins in 1m of water, and extreme temperatures.
Operating Temperature -20°C to +60°C
Installation Compact and concealable. Multiple installation options for covertly and easily securing the device to assets with screws, bolts, cable ties, rivets, and more.
Cellular Antenna Internal
3-Axis Accelerometer 3-Axis Accelerometer to detect movement and high G-force events
Diagnostic LED Diagnostic LED signifies operation status
Flash Memory Store weeks of records if device is out of cellular coverage. Storage capacity for over 10 days of continuous 30-second logging.

 

SMARTS

Auto-APN Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware
Geofence Alerts The server can use device location to create geofences and alerts if an asset enters or leaves designated locations
Impact Detection Configure impact-detection alerts when g-forces are exceeded by a user-defined threshold
Periodic or Movement-Based Configure parameters to send updates based on set time intervals or when movement occurs. Adaptive tracking technology detects when the device is on the move and increases the update rate, providing detail when you need it while conserving battery when stationary.
Preventative Maintenance Set reminders based on distance traveled and run hours to reduce maintenance and repair costs
Run Hour Monitoring Capture run hours based on movement to understand and optimize asset utilization
Sleep Mode Stationary devices enter sleep mode until movement occurs to conserve battery life and optimize data usage
Theft Recovery Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval

 

DEVICE MANAGEMENT

Flexible Configuration Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application
OEM Server Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system

 

INTEGRATION

Third-Party Integration TCP Direct or HTTPS Webhook

 

SECURITY

Data Security Military-level AES-256 Encryption from device to OEM Server to protect the integrity and confidentiality of telematics data.
Data forwarded to third-party systems is sent via HTTPS for end-to-end security.

 

WARRANTY

Manufacturer’s Warranty One year manufacturer’s warranty

 

CERTIFICATIONS

Please contact us for a full list of compliance specifications and documentation for your region. LTE-M / NB-IoT – ACMA (DoC), CE (DoC)
2G – CE (DoC)

How can we help you?