Dart3 BLE

Quectel EG912 operates on all major global 4G LTE Cat 1bis and 2G bands.

Supported 4G LTE Cat 1bis bands:
B1, B2, B3, B4, B5, B7, B8, B12, B13, B17, B18, B19, B20, B25, B26, B28, B34, B38, B39, B40, B41, B66

Bluetooth 4.2 gateway reports nearby Bluetooth tags and sensors.

 Internal Nano 4FF SIM.

 Quectel LC76G.

Disabled at firmware level for future implementation.

Concurrent GPS, GLONASS, Galileo, BeiDou, QZSS.

GNSS almanac and ephemeris data for greater sensitivity and position accuracy.

GPS signals are filtered and boosted by a SAW filter and low-noise amplifier (LNA) allowing operation where other units fail.

~1.5m CEP 

* Positioning accuracy specifications are provided by the module supplier and reflect ideal conditions. Device configuration, installation, environmental conditions, augmentation services, and many other factors may lead to variations in positioning accuracy. 

10-30V DC (max).

Stringent power “load dump” tests are conducted to ensure operation in the harshest automotive electrical systems. Built-in  
self-resetting fuse makes installation simple and safe.

Device enters sleep mode when vehicle is inactive to prevent battery drain.

<1mA (no peripherals supplied and battery fully charged).

200mAh LiPo internal backup battery pack. 

98 x 45 x 14 mm (3.86 x 1.77 x 0.55 in) .

8 wire harness / 600mm length supplied as standard. 

Operating: -30°C to +60°C (connected to external power)  

At < 0°C and > +40°C the internal backup battery will not be charged as a safety precaution due to the dangers associated with charging batteries at extreme temperatures.  

Recommended Storage: 10°C to 30°C, Humidity 30%. Store in a cool, dry place.

Internal.

Internal.

3-Axis accelerometer to detect movement, acceleration, high-g events, and more.  

Diagnostic LED indicates operation status. 

Store records if device is out of cellular coverage. View storage capacity here. 

The device continuously monitors speed and heading, allowing for over-speed alerts as well as updates on speed and heading changes. 

Provides ambient temperature but may not be suitable for precise temperature logging purposes. 

Nordic nRF9160 Modem operates on all major global LTE-M and NB-IoT bands.

Supported LTE bands: LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B66 NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66.

1 x Analog Input 0-30V

1 x Digital Input 
Configurable pull-up/down 
0-50V DC Input Range 

1 x Switched Ground Digital Output – 2A max  

Easily wired up to switch external lights, relays, buzzers, etc. Can be used to immobilize a vehicle.

1 x Shared Ignition Digital Input 0-50V DC  
2V on threshold  
May be used as a digital input if not required (fixed pull-down) 

1-Wire® or iButton® can be used to read Driver ID tags. Readers available to suit multiple card formats. 

Configure accident and rollover alerts, triggered by extreme changes in the velocity and orientation of the vehicle or equipment. Up to 2 hours of second-by-second ‘black box’ data is stored to provide critical accident reconstruction data. 

RFID reader or iButton® interface for Driver ID, access control, and log booking. 

Monitor speeding, harsh acceleration, braking, cornering, idle times and more to improve safety and prevent unnecessary wear on vehicles. 

Interface with a range of devices and switches for seatbelt detection, duress and panic buttons, lights, in-cab warning buzzers, and more. 

The server can use device location to create geofences and alerts if an asset enters or leaves designated locations. Geofences can also be downloaded directly to the device for enhanced location-based actions and alerts. View storage capacity here. 

GPS jamming or interference can be detected and alerted on. 

Can be wired up to external buzzers or lights for in-vehicle alerts. 

Set reminders based on distance travelled and run hours to reduce maintenance and repair costs. 

Device remains continuously connected while on the move for  
real-time asset tracking. 

Digital outputs can be connected to a relay to enable remote immobilization of vehicles and equipment in the case of theft, abuse, or unauthorized usage. 

Calculate run hours and distance travelled (odometer) to understand and optimize asset utilization. 

Instant alert if the device is disconnected from its power source. 

Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval. 

Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application. 

Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system. 

TCP Direct or HTTPS Webhook 

Command and configure the device via rich API functionality. 

Military-grade AES-256 Encryption from device to Device Manager to protect the integrity and confidentiality of your data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security. 

Two-year manufacturer’s warranty. Exclusions apply. 

Please view our knowledge base for regulatory and network certifications.

All new product statements contained herein that are not statements of historical fact, including statements that use the words “to become,” “will,” “designed to” or other similar words or expressions, that describe Digital Matter’s hardware, software or its management’s future plans, including hardware features, components, housing and stock availabilities, are “forward-looking statements."​   

Such forward-looking statements involve known and unknown risks, uncertainties and other factors. Please use caution when making purchase decisions at this stage.