Global Connectivity
Choose regional or international connectivity to match your deployment using the network coverage guide above.
Indoor and Outdoor Visibility
Compatible devices combine GNSS with Wi-Fi scanning and cell-tower positioning. Accuracy varies by method, infrastructure and surroundings; indoor estimates are not equivalent to an unobstructed outdoor GNSS fix.
Theft Recovery
Switch supported devices into Recovery Mode for more frequent reporting during retrieval. Command delivery and subsequent uploads depend on connectivity and device communication settings.
Asset Utilization and Run Hour Monitoring
Use movement-derived activity and run-hour records on supported devices to understand utilisation and inform servicing. Movement-based estimates should not be treated as direct engine-hour measurements.
Onboard Geofencing
Set geographic boundaries for location-based actions on supported models. Other devices use platform-based geofences, with notifications generated from received position reports.
Impact and Tip Detection
Configure supported accelerometer functions to report impacts or changes in orientation. Set thresholds around normal handling conditions to reduce unwanted events.
Rotation Counting
Selected devices can count rotations to help measure equipment activity. Confirm current model and firmware availability before specifying this feature.
Low Battery Alerts
Supported devices report low-battery warnings; others provide periodic battery-status messages. Use the available indicators to plan servicing rather than relying on a remaining-life estimate alone.
Off-the-Shelf Batteries
User-replaceable batteries simplify field servicing. Follow the selected device's battery recommendations for approved brands, chemistry and replacement procedures.
Rugged and Waterproof
Industrial enclosures protect against dust, water and handling exposure. Check the device's IP and impact ratings against the actual installation conditions.
Wire-Free Installation
Secure compatible devices using screws, bolts, cable ties or rivets. Select a protected mounting position that avoids unnecessary antenna obstruction and allows future battery access.


-1.png?width=250&height=87&name=John%20Holland%20Case%20Study%20(1)-1.png)




.png?width=250&height=100&name=Watermappers%20Case%20Study%20(1).png)










