High Precision GPS
GPS and GLONASS positioning systems are used simultaneously with a 72 channel high sensitivity receiver (-167dBm) for enhanced accuracy and faster fixes.
Bluetooth® 5.0 Gateway for affordable tagged asset management and sensor monitoring applications.
Rugged & Weatherproof
IP67 rated housing ensures the device can withstand fine dust, high-pressure spray, submersion for 30 minutes in 1m of water, and extreme temperatures.
Battery-Powered or Hardwired
The Eagle can be powered by 4 x C Batteries or hardwired to permanent power.
The Eagle can be powered with optional Lithium Thionyl Chloride (LTC) batteries for enhanced temperature tolerance and increased battery life.
Inputs / Outputs
Interface with a range of devices and switches to fit any application including door or gate open/close, water meters, pump running/not running, and more.
3-Axis Accelerometer to detect movement and high g-force events.
I²C and SDI-12 Interfaces
Connect a range of sensors such as temperature, humidity, moisture, depth, and more for environmental monitoring.
Create custom geofences and alerts if an asset enters or leaves specific locations. Geofences can also be downloaded directly to the device for enhanced location-based behaviors.
Run Hour Monitoring
Capture run hours based on movement to understand and optimize asset utilization.
Set reminders based on distance traveled, run hours, and more to reduce maintenance and repair costs.
Multiple installation options for covertly securing devices to assets with screws, bolts, cable ties, rivets, and more.
Scalable IoT Device for Advanced Applications
The “Swiss Army Knife” of Tracking – Interface with a range of devices, switches, and sensors to fit complex IoT applications.
Temperature & Humidity
Connect a range of sensors such as temperature, humidity, moisture, depth, and more for monitoring sensitive environments or assets.
Infrared Thermal Sensors
Interface with Infrared Thermal Sensors for a cost-effective alternative to more expensive high-end thermal cameras.
Remotely monitor events such as water, electricity, or gas consumption, door open/close counts, and more with wireless pulse counting.
Tank Level Monitoring
Monitor water tank levels remotely and configure alerts when specific levels are reached.
Configure a relay to switch pumps off when not in use and on again as required.
Explore our comprehensive knowledge base to configure, connect and install the Eagle.
View and download the Eagle datasheet.
Frequently asked questions about the Eagle.
Getting Started Guide
Learn how to assemble, connect and install the Eagle.
Calculate estimated battery life based on several tracking parameters.
Battery recommendations for the Eagle.
Supported Sensors and Inputs
Supported sensors and inputs for the Eagle.
Connecting Infrared Sensors
The MLX9060 infrared camera can be connected directly to the Eagle.
Frequently Asked Questions
Technical Drawing for device dimensions.