The Yabby Edge Cellular is available in LTE-M/NB-IoT
|LTE-M / NB-IoT
(supports roaming between networks – roaming SIM required)
|Nordic nRF9160 Modem operates on all major global LTE-M and NB-IoT bands
Supported LTE bands:
LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B66
NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66
|SIM Size & Access
|Internal Nano 4FF SIM
|3 x AAA. Batteries not included.
|Supported Battery Types
|Lithium (LiFeS2) – Lithium recommended for best performance
*Please dispose of Lithium batteries in a safe and responsible manner
|**Battery Life Estimates
|Once Daily location updates – 10+ years
Movement-Based location updates – 3.5 years
Hourly location updates – 2 years
|Concurrent GPS / BeiDou
|Asset location is calculated in Digital Matter’s Location Engine
|-134 dBm autonomous / -141 dBm aided
|GNSS almanac data for greater sensitivity and position accuracy
|Low Noise Amplifier
|GPS signals are filtered and boosted by a SAW filter and low-noise amplifier (LNA) allowing operation where other units fail
|Cell Tower Location
|Cell tower fallback for positioning when there is no GNSS or WiFi signal
|Indoor asset location using Wi-Fi access point scanning (device does not connect to Wi-Fi)
*Average current in lowest power configuration.
MECHANICS / DESIGN
|Standard – 84 x 63 x 24 mm (3.31 x 2.48 x 0.94″)
Livestock Collar – 109 x 60 x 30 (4.29 x 2.36 x 1.18″)
Snap Housing (Smallest Size, not IP67 rated) – 75 x 45 x 25 mm (2.95 x 1.77 x 0.98″)
|Standard – 82 g (2.9 oz)
|Non-branded housing for optional white-labeling
|Ultra-rugged and waterproof IP68 and IK06-rated housing ensures the Yabby Edge can withstand impact, fine dust, and brief submersion
|Compact and concealable. Multiple installation options for covertly and easily securing the device to assets with screws, bolts, cable ties, rivets, and more. Stainless steel screws supplied. Collar housing available for securing device to livestock.
|-30°C to +60°C
|3-Axis Accelerometer to detect movement and high G-force events
|Diagnostic LED indicates operation status
|Store weeks of records if device is out of cellular coverage. Storage capacity for up to 5 days of continuous 30-second logging.
|Speed and Heading
|Scanning technology used on the Yabby Edge does not return speed and heading
|The device reports internal temperature which provides an indication of ambient temperature but may not always be precise
|Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware
|Battery Life Monitoring
|“Battery Low” and “Battery Critical” alert levels
|The server can use device location to create geofences and alerts if an asset enters or leaves designated locations
|Configure impact-detection alerts when G-forces are exceeded by a user-defined threshold
|Intelligent Power Management
|Early registration abort and location scan throttling options
|Periodic or Movement-Based Tracking
|Configure parameters to send updates based on set time intervals or when movement occurs. Adaptive tracking technology detects when the device is on the move and increases the update rate, providing detail when you need it while conserving battery when stationary.
|Set reminders based on distance traveled and run hours to reduce maintenance and repair costs
|Run Hour Monitoring
|Capture run hours based on movement to understand and optimize asset utilization
|Stationary devices enter sleep mode until movement occurs to conserve battery life and optimize data usage
|Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval
|Tip Detection & Rotation Counting
|Axis angle reporting, tip detection and rotation counting
|Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application
|Device Management Platform
|Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system
|Digital Matter’s Location Engine makes it easy to perform cloud-based position solving and integrate data into any system
|Configurable with DM-Link provisioning tool
|Military-level AES-256 Encryption from device to OEM Server to protect the integrity and confidentiality of telematics data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security.
|Two-year manufacturer’s warranty. Exclusions apply.
|Please see our knowledge base for device certifications
**Battery life estimates are influenced by several factors including temperature, installation and orientation of the device, the frequency of location updates, network coverage, sensor integrations, peripherals, accelerometer settings, and more. Estimated battery life calculators are available at support.digitalmatter.com.
Let’s Get Started
Submit the form below to get in touch with a Digital Matter representative from your region.