Bolt2

Tech Specs

CONNECTIVITY

The Bolt2 is available in Cellular LTE-M / NB-IoT

LTE-M / NB-IoT Nordic nRF9160 Modem operates on all major global LTE-M and NB-IoT bands.
Supported LTE bands:
LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B66
NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66
SIM Size & Access Internal Nano 4FF SIM

 

LOCATION

GNSS Module UBLOX EVA-M8Q with TCXO
Constellation Concurrent GPS / GLONASS
Channels 72 Channel High Sensitivity Receiver
Tracking Sensitivity -167dBm industry-leading tracking performance
GNSS Assistance GNSS almanac data for greater sensitivity and position accuracy
Low Noise Amplifier GPS signals are boosted by a unique low-noise amplifier (LNA) allowing operation where other units fail
Cell Tower Location Cell tower location fallback for positioning when GPS can’t get a fix

 

POWER

Input Voltage 8-36V DC (max). OBDII connector draws power from vehicle’s OBD port
Self-Resetting Fuse Built-in self-resetting fuse makes installation simple and safe. Stringent automotive power “load dump” tests are conducted to ensure operation in the harshest electrical systems.
Operating Current ~25/50mA when moving
Sleep Current <1mA
Backup Battery 200mA LiPo internal backup battery pack

 

MECHANICS / DESIGN

Dimensions 71 x 46 x 24 mm (2.8 x 1.81 x 0.94″)
Weight 48 g (1.69 oz)
Housing ABS Polycarbonate Plastic
Operating Temperature -20°C to +60°C
Installation OBDII standard connector draws power from the OBDII port to operate
GPS Antenna Internal
Cellular Antenna Internal
RF Antenna Internal
3-Axis Accelerometer 3-Axis Accelerometer to detect movement, high G-force events, and more
Diagnostic LED Diagnostic LED signifies operation status
Flash Memory Store weeks of records if device is out of cellular coverage. Storage capacity for over 10 days of continuous 30-second logging.
On-Board Speed and Heading
The device continuously monitors speed and heading, allowing for over-speed alerts as well as updates on speed and heading changes.
 On-Board Temperature The device reports internal temperature and prevents the internal battery from charging in extreme temperatures. Internal temperature provides an indication of ambient temperature but may not always be precise.

 

SMARTS

Auto-APN Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware
Accident & Rollover Detection Configure accident and rollover alerts triggered by extreme changes in velocity and orientation of vehicle or equipment. Second-by-second GPS data is saved on the device’s flash memory, with a capacity of approximately 2 hours of data. In the event of an accident, a subset of the data (60 seconds before / 10 seconds after) is uploaded to the server automatically (if configured) or can be requested manually for a detailed reconstruction of the incident.
Driver Safety & Behavior Monitor speeding, harsh acceleration, braking, cornering, idling, and more to improve safety and prevent unnecessary wear on vehicles
Geofence Alerts The server can use device location to create geofences and alerts if an asset enters or leaves designated locations
Preventative Maintenance Set reminders based on distance traveled and run hours to reduce maintenance and repair costs
Real-Time Tracking Device remains continuously connected while on the move for real-time asset tracking
Run Hour Monitoring Calculate run hours and distance traveled (odometer) to understand and optimize asset utilization
Tamper/Removal Detection Critical ‘unplugged/power loss’ alerts to notify users of device removal, tampering, unauthorized trips, or theft
Theft Recovery Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval

 

DEVICE MANAGEMENT

Flexible Configuration Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application
Device Management Platform Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system
Configuration App Configurable with DMLink provisioning tool

 

INTEGRATION

Third-Party Integration TCP Direct or HTTPS Webhook

 

SECURITY

Data Security Military-level AES-256 Encryption from device to OEM Server to protect the integrity and confidentiality of telematics data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security.

 

WARRANTY

Manufacturer’s Warranty One year manufacturer’s warranty

 

CERTIFICATIONS

Visit support.digitalmatter.com for device certifications.

Let’s Get Started

Fill out the form below to discuss Digital Matter solutions, pricing and availability in your region.