Falcon

Robust battery-powered or wired GPS tracking device with inputs/outputs, I²C Sensor Interface, and WiFi Positioning for indoor and outdoor asset tracking and sensor monitoring

  • High-precision GPS/GLONASS tracking device with WiFi Access Point Scanning
  • Flexible Power Options – 3 x AA Batteries with up to 7 years battery life or wired to permanent power
  • 1 x Analog Input, 2 x Digital Inputs, 1 x Switched Ground Digital Output, 1 x Ignition Digital Input, Switched Power Out
  • I²C Sensor Interface
  • Weatherproof and ultra-rugged IP67 Housing
View Tech Specs
Falcon Batteries

Falcon-Batteries

Falcon Top

Falcon-Top

Falcon Bottom

Falcon-Bottom

Falcon Short Side

Falcon-Short-Side

Falcon Long Side

Falcon-Long-Side

Falcon Angle

Falcon-Angle

Tech Specs Device Management Integration Resources
Request Pricing

Falcon Features

High Precision GPS

GPS and GLONASS positioning systems are used simultaneously with a 72 channel high sensitivity receiver (-167dBm) for enhanced accuracy and faster fixes.

WiFi Positioning

Indoor asset location using WiFi Positioning Systems.

Rugged & Weatherproof

IP67 rated housing ensures the device can withstand fine dust, high-pressure spray, submersion for 30 minutes in 1m of water, and extreme temperatures.

Battery-Powered or Hardwired

The Falcon can be powered by 3 x AA Batteries or hardwired to permanent power.

Battery Life Monitoring

Built-in Battery Management for monitoring battery use and accurate remaining life predictions.

Temperature Tolerance

The Falcon can be powered with optional Lithium Thionyl Chloride (LTC) batteries for enhanced temperature tolerance and increased battery life.

I²C Sensor Interface

Connect a range of sensors such as temperature, humidity, moisture, depth, and more for environmental monitoring.

Inputs / Outputs

Interface with a range of devices and switches including door open/close, duress and panic buttons, lights, pulse counting, and more.

Theft Recovery

Switch to Recovery Mode in the case of theft or loss to activate live-tracking at 30-second intervals for asset retrieval.

Periodic or Movement-Based

Configure devices to send updates based on set time intervals (1x, 3x, 5x a day, etc.,) or when movement occurs.

Run Hour Monitoring

Capture run hours based on movement to understand and optimize asset utilization.

Flexible Configuration

Configure device parameters such as heartbeat rate, movement and accelerometer settings, and more to fit any tracking application.

View All Features

Indoor/Outdoor Asset Tracking with Sensor Monitoring

Sensor Monitoring

Connect a range of sensors such as temperature, humidity, moisture, depth, and more for monitoring sensitive environments or assets.

Tank Level Monitoring

Monitor water tank levels remotely and configure alerts when specific levels are reached.

Pump Control

Configure a relay to switch pumps off when not in use and on again as required.

Door Open / Close

The Falcon can be paired with a reed switch to monitor and alert upon whether a door is open or closed.

Pulse Counting

Remotely monitor events such as water, electricity, or gas consumption, door open/close counts, and more with wireless pulse counting.

Indoor / Outdoor Asset Tracking

The Falcon features both GPS and a WiFi Sniffing Module to track assets indoors and out.

Run Hour Monitoring

Track run hours and schedule preventative maintenance reminders for equipment.

Theft Recovery

Configure timely movement alerts and quickly switch to Recovery Mode to assist in theft recovery.

Falcon Resources

Explore our comprehensive knowledge base to configure, connect, and install the Falcon.

 

i

Datasheet

View and download the Falcon datasheet.

i

FAQs

Frequently asked questions about the Falcon.

i

Getting Started Guide

Learn how to assemble, connect and install the Falcon.

i

Battery Life and Capacity Estimates

Calculate estimated battery life based on several tracking parameters.

i

Battery Recommendations

Battery Recommendations for the Falcon.

i

Supported Sensors and Inputs

Supported sensors and inputs for the Falcon.

i

Door Open / Close Monitoring

Pairing a Reed Switch with the Falcon for door open/close monitoring.

i

Falcon Temperature Readings in Telematics Guru

Reading and reporting I²C sensor readings from the Falcon.

i

Technical Drawing

View rugged housing dimensions.

Let’s Get Started

Fill out the form below to discuss Digital Matter solutions, pricing and availability in your region.