G100

G60

G52S

DART

REMORA

OYSTER

STING

 Dart GPS Tracker

lOW COST, RELIABLE GPS/GLONASS TRACKER

The Dart is a compact 2G or 3G (NextG) tracking device with a variety of inputs and outputs to cater for entry-level tracking applications, without sacrificing tracking and communications performance and reliability. Its compact housing contains the GPS and cellular antennae, and the 12 wire connector means that all of the Dart’s functionality can be easily accessed and makes installation a breeze. 

The internal backup battery provides alerts and tracking operations even when external power is removed. The optional internal buzzer, 3D accelerometer and flash memory round out a product that is low cost but still packs a punch. The Dart can simultaneously use GPS and GLONASS satellites, providing double the number of positioning satellites than standard tracking products. The result is faster acquisition and more accurate and reliable tracking.

  • Affordable and reliable
  • Concurrent GPS and GLONASS tracking
  • Easy install & Easy to conceal
  • Compact 2G or 3G (NextG)
  • Variety of inputs and outputs
  • Equipment Telematics

    Equipment tracking and monitoring of run hours e.g. mining equipment, lighting towers, pumps and generators.

    Vehicle & Fleet Tracking

    Affordable enough for use in private vehicles, even greater ROI for fleet tracking applications.

    Rental, Finance & Leased Assets

    Ideal for tracking rental, financed and leased assets in order to reduce risk and ensure asset return.



    Hardware Features

    Compact housing

    The housing clips together to make provisioning devices simple and efficient.

    Dimensions: 95mm x 55mm x 17mm
    Weight: 150 grams

    Harness

    A standard 12 wire harness is supplied with the Dart

    See the user manual for harness details

    Automotive power

    Voltage

    8V to 36V DC (max)

    Operating Current

    10mA average (battery fully charged)

    145mA average (battery charging)

    Sleep Current

    <1mA

    The Dart passes stringent automotive power “load dump” tests to ensure that it will continue to operate in the harshest electrical systems. A built-in self-resetting fuse makes installation easy and safe.

    Operating Temperature

    -20°C to +60°C 1

    1) On external power.

    Below 0°C the standard internal backup battery’s ability to deliver sufficient power to operate the cellular modem is reduced. Below 0°C and above +45°C the internal backup battery will not be charged as a safety precaution due to dangers associated with charging batteries at extreme temperatures.

    For battery powered tracking in extreme temperatures enquire about our Remora tracker with extended temperature range battery options.

    Concurrent GPS and GLONASS tracking

    Concurrent GPS and GLONASS tracking
    72 channel high sensitivity receiver
    -169dBm industry leading tracking performance
    Battery backed up for optimal hot-start performance
    AssistNow Offline aiding data for extremely fast time-to-first-fix and performance in urban canyon environments

    Low Noise GPS Amplifier (LNA)

    The Dart’s GPS signals are boosted by a special low-noise amplifier (LNA). This allows the Dart to operate where normal units will fail to receive GPS signal

    Even when designing a low-cost device Digital Matter is not prepared to compromise on the performance of the product. You will see the difference if you compare device performance in low signal environments.

    2G, 3G or 4G

    The Dart can be manufactured for specific markets around the world with cellular modem modules approved by all the major networks

    2G Modem

    Quad Band GSM/GPRS Class 10
    850 / 900 / 1800 / 1900 MHz

    3G Modem – EU

    850 / 900 / 2100
    EMEA / APAC / Latin America

    3G Modem - NA

    850 / 1900 / AWS
    North America

    3G Modem
    (Global Option)

    800 / 850 / 900 / AWS / 1900 / 2100
    Global coverage at a higher cost

    *enquire for other bands and LTE / 4G options

    Certifications

    CE, RCM, ICASA

    Internal Antenna

    Internal GPS and cellular antennas

    Having the antennas inside the housing makes for very simple and quick installation. The Dart has had its antennae tuned by the top laboratories to ensure optimal performance.

    Backup battery

    The 400mAh LiPo backup battery allows the Dart to continue to operate when external power is removed for up to 5 days, depending on the amount of movement

    3 x Digital Inputs

    1 x Ignition line
    2 x digital inputs with configurable pull-up / pull-down
    Numerous configuration options including switches, duress/panic alerts, pulse counting and other applications

    1 x Digital Output

    1 x switched ground digital output, easily wired up to switch external lights, relays, buzzers, sirens, motors and other devices
    Can be used to immobilise a vehicle

    Internal Buzzer (optional)

    For high volume orders the Dart can be manufactured with an internal buzzer to provide an audible alert without requiring the installation of an external buzzer. Can be used for speeding alerts, harsh driving alerts, reminders to swipe RFID tags, error conditions and other events

    3 axis accelerometer

    The 3 axis accelerometer allows the Dart to detect harsh driving events (harsh acceleration, braking and cornering) and this information can be used to monitor driver behaviour and unsafe driving.
    It also allows the Dart to go to ‘sleep’ when not moving, resulting in extremely low standby current.

    Serial Port

    The TTL serial interface allows the Dart to interface with external devices and peripherals, including a low-cost RFID tag reader for driver identification

    Switched Power Out

    The Dart can provide power to external sensors and devices via this power line, allowing for easy installation and doing away with the need for additional external power supplies.

    Voltage: 3.5v to 4.5v

    Maximum current: 200mA

    Flash memory

    The Dart has sufficient memory to store over 50,000 records in its flash memory. Normally the data will be sent to the server immediately but if the device is out of range then there is sufficient space to ensure that no data is lost – for many weeks of driving!

    The flash memory is also used to store parameters, GPS aiding data, accident data, driver lists, geo-fences and other important information that needs to be securely stored.

    Warranty

    One year manufacturer’s warranty

    Peripheral Options

    RFID Driver ID Reader

    Compact 125kHZ RFID Reader reads cards and keyfobs


    • 5cm typical read range (can read through plastic / dashboard)
    • Plugs into the DMCAN peripheral plug on the G60 harness for easy installation
    • Includes a LED and buzzer for reminding drivers to swipe their card
    • Compatible with the EM4001 RFID standard
    • Optional 125kHz HID reader option

     


    Firmware Smarts

    Auto-APN

    Auto-APN allows the Dart to analyse the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware. This means that the Dart can be shipped world-wide without requiring specialist setup for SIMs.

    Text Message Setup

    The Dart can also be sent text messages to setup the APN, server and other details

    Multi-APN

    The Dart can be configured to roam across multiple networks and to automatically use the different APN details for the roaming networks.

    AssistNow Offline

    The Dart will track successfully where other devices just give up.

    This fantastic technology allows the GPS to predict which satellites are in orbit above it and to dramatically reduce the time-to-first-fix of the GPS, and the overall performance of the GPS, especially in ‘urban canyon’ or forested environments.

    Flexible Logging Parameters

    The Dart trip logging is flexible and can be configured to log based on a variety of parameters including:

    • Elapsed time
    • Distance travelled
    • Change in heading
    • Change in speed
    • On Stationary
    • Accelerometer events (harsh driving)

    Accident and Rollover Detection

    The Dart uses the built-in accelerometer to detect high G impacts such as accidents and rollovers and reports these events to the server for emergency alerting.

    Harsh Driving

    The Dart automatically calibrates its built-in 3 axis accelerometer and uses this to detect harsh driving events:

    • Excessive acceleration
    • Harsh braking
    • Cornering at speed

    These events are logged in the Dart along with additional event statistics that allow back-end server platforms to perform sophisticated driver profiling and scoring.

    Accident Data

    The Dart keeps a second-by-second “black box” recording of valuable GPS and accelerometer data for a two hour window. This data can be automatically uploaded to the server when an accident is detected, or it can be requested manually.

    Driver Identification

    The Dart supports a low-cost external RFID reader to read cards and keyfobs in order to identify drivers

    Driver Lists

    The Dart can be updated from the server with lists of Drivers that are allowed to drive the vehicle that it is installed in. When a driver or operator registers on the Dart it will check the Driver List to see if that person is authorised to drive the vehicle. The list also includes information about the driver such as whether they can perform supervisor functions.

    The Dart can be installed to immobilise a vehicle and only allow authorised drivers / operators to drive it, or to annoy an unauthorised driver with a loud buzzer.

    Geo-Fences

    The Dart has the capacity to hold hundreds of geo-fences that can be downloaded to it from the server. The Dart can use this geo-fence information to:

    • Implement arrival and departure alerts
    • Implement speeding zones with audible warning alerts
    • Implement “No-go” and “Keep-out” areas
    • Automatically control outputs, for example to switch on warning lights when inside a special area
    • Warn drivers when approaching dangerous intersections
    • Disable data communications within intrinsically safe areas

     

    Emulated Ignition

    This setting allows the Dart to determine that a trip has started based on accelerometer and GPS data and to automatically set the ‘ignition’ input on the device to emulate the ignition line.

    This means that the Dart can be installed with the option of not wiring in the ignition line and ‘emulating’ the ignition based on movement.

    Run Detect

    This setting allows the Dart to monitor the system voltage and to detect changes in the voltage that indicate if the engine is running or not.

    Support Documentation

    Download Resource documents for the Dart
    Support >

    Device Management – OEM Server

    All Digital Matter devices are fully managed Over-The-Air (OTA) via our OEM Server web interface. The OEM Server seamlessly manages:

    • Device firmware – firmware updates can be done remotely
    • Network (administrator) parameters relating to critical communications
    • System parameters, including GPS parameters, IO configuration, logging options and general device behaviour settings
    • GPS AssistNow Offline aiding data files
    • Remote debugging of devices, including being able to trace data, view detailed debug message logs, and view a live trace of the server debug messages
    • Remote disconnect and reboot of devices
    • Driver list downloads to devices – this allows for the Driver Identification on the device to check if the RFID tag / username / PIN is valid, and for specific drivers to be allowed to drive / operate particular vehicles, for example based on licences or permits.
    • Geo-fence syncing with the devices – this allows the device to do advanced in-cab alerting and monitoring such as geo-fence arrival and departure, speed limit alerting, dangerous intersection warnings, turn on warning lights inside a geo-fence, and disable communications inside intrinsically safe zones such as gas plants.
    • Provides a command and message queueing platform to the devices and is incorporated into the remote management and debugging applications

     

    Data Connectors

    The OEM Server provides Data Connectors that forward data records on to the software platform of your choice, including Digital Matter’s own Telematics Guru and GPS Log Book platforms.

    More information on the OEM Server can be found at http://www.digitalmatter.com.au

    If you would like to integrate the Dart into a software system then please contact Digital Matter for more information on our integration protocols.


    Feature Full!

    Packed full of features like accident detection, roll-over alerts, harsh acceleration & braking detection, geo-fence alerts and even speed alerts.

    Dual GPS & GLONASS

    The Dart supports position tracking using both the American GPS satellites and the Russian GLONASS system concurrently resulting in amazingly fast and accurate tracking with double the number of satellites available for use.