G62
Rugged and robust vehicle, trailer, or heavy equipment GPS tracking device with inputs/outputs, remote immobilization for fleet management, equipment monitoring, driver ID, theft recovery, and more
- High-precision GPS/GLONASS tracking device wired to permanent power
- Internal Backup Battery in case of loss of power or tampering
- 2 x Digital Inputs, 1 x Switched Ground Digital Output, 1 x Ignition Digital Input
- 1-Wire® or iButton® can be used to read Driver ID tags
- Run hour monitoring, accident and rollover detection, speeding, harsh braking, and more
- Weatherproof and ultra-rugged IP67 Housing
G62-Angle
G62-PCB
G62-Long-Side
G62-Short-Side
G62-Top
G62 Features
High Precision GPS
GPS and GLONASS positioning systems are used simultaneously with a 72 channel high sensitivity receiver (-167dBm) for enhanced accuracy and faster fixes.
Real-Time Tracking
The G62 remains continuously connected while on the move for real-time vehicle and equipment tracking.
Rugged & Weatherproof
IP67 nylon glass housing ensures the G62 can withstand fine dust, high-pressure spray, submersion for 30 minutes in 1m of water, and extreme temperatures.
Back-up Battery
Features a 1100mAh LiPo internal backup battery pack in case of loss of power or tampering.
Remote Immobilization
Digital outputs can be connected to a relay to enable remote immobilization of vehicles and equipment in the case of theft, abuse or unauthorized usage.
Theft Recovery
Switch to Recovery Mode in the case of theft or loss to activate live-tracking at 30 second intervals for asset retrieval.
Inputs / Outputs
Interface with a range of devices and switches for seatbelt detection, duress and panic buttons, lights, in-cab warning buzzers, and more.
Driver ID Options
Configure iButton® for Driver ID, Access Control, and Logbooking.
Driver Safety & Behavior
Monitor speeding, harsh acceleration, braking, cornering, and more to improve safety and prevent unnecessary wear on vehicles.
Accident & Rollover Detection
Configure accident and rollover alerts triggered by extreme changes in velocity and orientation of vehicles.
Run Hour Monitoring
Calculate run hours and distance traveled (odometer) to understand and optimize vehicle and equipment utilization.
Preventative Maintenance
Set reminders based on distance traveled and run hours to reduce maintenance and repair costs.
Ultra-rugged for Vehicles and Heavy Equipment
Fleet Management
Capture and analyze critical data points to improve and optimize fleet management strategies.
Driver ID, Safety & Behavior
Promote safe driving and meet compliance with real-time speeding, harsh driving, accident alerts, and more.
Preventative Maintenance
Set up scheduled maintenance alerts based on distance traveled to reduce maintenance and repair costs.
Theft Recovery
Configure timely movement alerts and quickly switch to Recovery Mode to assist in theft recovery.
Digital Logbooking
Streamline fuel tax credit claims, mileage rebates, and business versus private logging with digital reporting.
Datasheet
View and download the G62 datasheet.
FAQs
Frequently asked questions about the G62.
Getting Started Guide
Learn how to assemble and connect the G62.
Installation Guide
Learn how to install and test the G62.
Technical Drawing
Technical drawing for device dimensions.
Take control of your data
Integration
Flexible integration options via Webhook, TCP or HTTP/HTTPS, Direct Integration or Data Splitting.
Security
Military-level AES-256 Encryption to protect the integrity and confidentiality of your telematics data.
Related Devices
Bolt OBD
Plug and Play OBD GPS for real-time vehicle tracking and driver behavior monitoring
- High-precision GPS/GLONASS tracking device plugs into existing OBDII ports
- Multiple installation options (traditional plug and play, splitter installation, or secure with cable ties)
- Speeding, harsh braking and cornering, accident and rollover detection
- Electronic Odometer Readings
- Accelerometer for Smart Movement Based Tracking
Dart2
Robust and affordable vehicle tracking device with inputs/outputs, remote immobilization for fleet management, driver ID, driver safety and behavior monitoring, theft recovery, and more.
- High-precision GPS/GLONASS wired vehicle tracking device / Optional OBDII or cigarette lighter power harness available for plug-and-play installation
- 2 x Digital Inputs, 1 x Switched Ground Digital Output, 1 x Ignition Digital Input, Switched Power Out
- Internal Backup Battery in case of loss of power or tampering
- Configure iButton® and RFID readers for Driver ID
- Accident and rollover detection, speeding, harsh braking, and more
- Immobilization option to safely disable assets remotely
Eagle
Rugged and robust datalogger with GPS and Bluetooth® Gateway featuring an impressive array of inputs/outputs and sensor interfaces.
- High-precision GPS/GLONASS tracking device
- Bluetooth® 5.0 Gateway for tagged asset management and sensor monitoring
- Flexible Power Options – 4 x C Alkaline or LTC Batteries or wired to permanent power
- 2 x Analog Inputs, 3 x Digital Inputs, 2 x Switched Ground Digital Outputs, 2 x 4-20mA Inputs
- I²C, SDI-12 and RS-485 Interface
- Weatherproof and ultra-rugged IP67 Housing
Falcon
Robust battery-powered or wired GPS tracking device with inputs/outputs, I²C Sensor Interface, and WiFi Positioning for indoor and outdoor asset tracking and sensor monitoring
- High-precision GPS/GLONASS tracking device with WiFi Access Point Scanning
- Flexible Power Options – 3 x AA Batteries with up to 7 years battery life or wired to permanent power
- 1 x Analog Input, 2 x Digital Inputs, 1 x Switched Ground Digital Output, 1 x Ignition Digital Input, Switched Power Out
- I²C Sensor Interface
- Weatherproof and ultra-rugged IP67 Housing
G120
GPS tracking device and Bluetooth® Gateway with optional Iridium Satellite for out-of-coverage tracking with inputs/outputs, RS-232 Interface, and remote immobilization for fleet management, driver ID, driver safety and behavior monitoring, remote worker safety, theft recovery, and more.
- High-precision GPS/GLONASS tracking device wired to vehicles or equipment
- Internal Backup Battery in case of loss of power or tampering
- Bluetooth® 5.0 Gateway for tagged asset management and sensor monitoring
- 1 x Analog Input, 6 x Digital Inputs, 2 x Switched Ground Digital Outputs, 1 x Ignition Digital Input, Switched Power Out
- RS-232 Interface to connect optional Iridium Edge® Module or interface with controllers and sensors
- Configure iButton®, RFID readers and Wiegand Interface for Driver ID
- Accident and rollover detection, speeding, harsh braking, and more
- Built-in Buzzer for in-cab alerts
G62 LoRaWAN®
Robust and ultra-rugged LoRaWAN® vehicle and heavy equipment tracking device with inputs/outputs for fleet management, equipment monitoring.
- High-precision GPS/GLONASS tracking device
- Weatherproof and ultra-rugged IP67 Housing
- Internal Backup Battery in case of loss of power or tampering
- 1 x Analog Inputs, 2 x Digital Inputs, 1 x Switched Ground Digital Output, 1 x Ignition Digital Input
- On-device Odometer Readings
SensorData LoRaWAN®
Robust and rugged LoRaWAN® datalogger with GPS, inputs/outputs, SD1-12, I²C Sensor Interfaces for asset tracking, agtech, and sensor monitoring.
- High-precision GPS/GLONASS tracking device
- Flexible Power Options – 4 x C Batteries or wired to permanent power
- Weatherproof and ultra-rugged IP67 Housing
- 1 x Analog Inputs, 2 x Digital Inputs
- SD1-12, I²C, Switched Power Out, Switched Sensor Power Interfaces
SensorNode Bluetooth®
Robust and rugged Bluetooth® tag with inputs/outputs and I²C sensor interface for asset and sensor monitoring applications.
- Bluetooth® 4.2 for sending asset data to Gateways
- Flexible Power Options – 3 x AA Batteries with up to 4 years battery life or wired to power
- Weatherproof and ultra-rugged IP67 Housing
- 2 x Analog Inputs, 2 x Digital Inputs
- I²C Sensor Interface
- Line of Sight up to 195m
- Does not require SIM or data plan
SensorNode LoRaWAN®
Robust and rugged LoRaWAN® datalogger with inputs/outputs and I²C sensor interface for asset and sensor monitoring.
- High-precision GPS/GLONASS tracking device
- Flexible Power Options – 3 x AA Batteries with up to 5 years battery life or wired to power
- Weatherproof and ultra-rugged IP67 Housing
- 2 x Analog Inputs, 2 x Digital Inputs
- I²C Sensor Interface