G70
Rugged and robust vehicle, trailer, or heavy equipment tracking device with inputs/outputs, remote immobilization for fleet management, equipment monitoring, driver ID, theft recovery, and more
- High-precision GNSS (GPS/GLONASS/Galileo) wired tracking device
- 1 x Ignition Digital Input, 3 x Digital Inputs, 1 x Analog Input, 1 x Switched Ground Digital Output
- Internal Backup Battery in case of loss of power or tampering
- Driver ID – Configure iButton®, TTL, or Wiegand inputs for Driver ID Readers
- Driver Behavior – Run hour monitoring, accident and rollover detection, speeding, harsh braking and cornering, and more
- Remote Immobilization – Immobilization option to safely disable vehicles and equipment remotely
- Weatherproof and ultra-rugged IP68, IK08 housing
- Available in Cellular 2G or LTE-M/NB-IoT versions
This device is designed, developed, and manufactured by Digital Matter
G62-Angle
G62-Top
G62-Long-Side
G62-Short-Side
G70 Features
Real-Time Tracking
The G70 remains continuously connected while on the move for real-time vehicle and equipment tracking.
Rugged & Weatherproof
Ultra-rugged and waterproof IP68 and IK08-rated housing ensures the G70 can withstand impact, fine dust, and brief submersion.
Inputs / Outputs
Interface with a range of devices and switches for seatbelt detection, duress and panic buttons, lights, in-cab warning buzzers, and more.
Back-up Battery
Features a 1100mAh LiPo internal backup battery pack in case of loss of power or tampering.
Driver ID Options
Configure iButton®, TTL, or Wiegand inputs for Driver ID Readers
Driver Safety & Behavior
Monitor speeding, harsh acceleration, braking, cornering, and more to improve safety and prevent unnecessary wear on vehicles.
Remote Immobilization
Digital outputs can be connected to a relay to enable remote immobilization of vehicles and equipment in the case of theft, abuse or unauthorized usage.
Accident & Rollover Detection
Configure accident and rollover alerts triggered by extreme changes in velocity and orientation of vehicles.
Run Hour Monitoring
Calculate run hours and distance traveled (odometer) to understand and optimize vehicle and equipment utilization.
White-Label Ready
Non-branded housing for seamless deployments under your own brand.
Theft Recovery
Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval.
Advanced Geofencing
Create custom geofences and alerts if an asset enters or leaves specific locations. Geofences can also be downloaded directly to the device for enhanced location-based behaviors.
Getting Started Guide
Get started with the G70.
Datasheet
View and download the G70 datasheet.
FAQs
G70 frequently asked questions.
Wire Definition
The G70 comes with a 10 wire, 1m long harness.
Related Devices
Dart3
Robust GPS vehicle tracking device with inputs/outputs, remote immobilization for fleet management, driver ID, driver safety and behavior monitoring, theft recovery, and more
- 2G or LTE-M (Cat-M1) / NB-IoT Connectivity
- 1 x Ignition Digital Input, 3 x Digital Inputs, 1 x Analog Input, 1 x Switched Ground Digital Output, Switched Power Out
- Accident and rollover detection, speeding, harsh braking, and more
G120
Vehicle and heavy equipment GPS tracking device and Bluetooth® Gateway with optional Iridium Satellite, inputs/outputs, RS-232 Interface, and more
- 2G or LTE-M (Cat-M1) / NB-IoT Connectivity
- High-precision GPS/GLONASS tracking device and Bluetooth® 5.0 Gateway
- 1 x Analog Input, 6 x Digital Inputs, 2 x Switched Ground Digital Outputs, 1 x Ignition Digital Input, Switched Power Out
- RS-232 Interface to connect optional Iridium Edge® Module or interface with controllers and sensors
G62 for LoRaWAN®
Ultra-rugged and robust wired vehicle and equipment GPS tracking device with I/O's
- High-precision GPS/GLONASS tracking device
- 1 x Analog Inputs, 2 x Digital Inputs, 1 x Switched Ground Digital Output, 1 x Ignition Digital Input
- Ultra-rugged IP67 Housing
Hawk
The Hawk is a rugged and robust IoT datalogger for a wide range of sensor and condition monitoring applications.
- Available in multiple power and housing variations to best fit your application
- Limitless options for interfacing to sensors such as SDI-12, I²C, 1-Wire, iButton, 4-20mA, RS-485, RS-232*, Analog Inputs, Digital Inputs, Pulse Counting, Digital Outputs, Switched Power, and more
- GPS Location and Powerful task management
- OTA Device Configuration and Management
The Digital Matter Difference
QUALITY matters
‘Good Enough’ is Not Enough For Your Critical Assets
Details matter. Our entire process is underpinned by a relentless attention to detail to consistently deliver solutions of the highest-possible quality and reliability.
POWER matters
The Power to Do More with ‘Deploy Once’ Battery Life
Through smarter design and better engineering we’re now able to achieve ‘deploy once’ battery life, significantly reducing operating costs and enabling deployments at scale.
FLEXIBILITY matters
Demand More From Your Devices
Easily configure your devices with full control over a rich set of device parameters. Send data to any end platform with multiple integration options.
SECURITY matters
Authenticated and Encrypted Everywhere
We implement comprehensive security protocols on our hardware and software to protect the integrity and confidentiality of your IoT data.
Compare Devices
Compare our full range of IoT asset tracking hardware to find the device that best matches your application.
Let’s Get Started
Submit the form below to get in touch with a Digital Matter representative from your region.
Looking for support? Check out our knowledge base.
Information on becoming a Digital Matter Partner.
Information on pricing, availability, and proof of concept.
Guidance on selecting the right products for your application.