Oyster3

Tech Specs

CONNECTIVITY

The Oyster3 is available in LTE-M/NB-IoT

LTE-M / NB-IoT
(supports roaming between networks – roaming SIM required)
Nordic nRF9160 Modem operates on all major global LTE-M and NB-IoT bands.
Supported LTE bands:
LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B66
NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66
SIM Size & Access Internal Micro 4FF SIM

 

BATTERIES

User-Replaceable Batteries 3 x AA
Supported Battery Types

Alkaline
*Lithium (LiFeS2)
*Lithium Thionyl Chloride (LTC)

*Lithium or LTC recommended for best performance. Please dispose of Lithium batteries in a safe and responsible manner.

*Battery Life Once Daily location updates – 10+ years
Movement-Based location updates – 7 years
Hourly location updates – 3.5 years

 

LOCATION

GNSS Module Sony CXD5605
Constellation Concurrent GPS, GLONASS, Galileo, BeiDou, QZSS
Tracking Sensitivity -147 dBm cold start / -161 dBm hot start
GNSS Assistance GNSS almanac and ephemeris data for greater sensitivity and position accuracy
Low Noise Amplifier GPS signals are filtered and boosted by a SAW filter and low-noise amplifier (LNA) allowing operation where other units fail
Cell Tower Location Cell tower location fallback for positioning when GPS can’t get a fix

 

POWER

Input Voltage 3.3-16V DC
Sleep Current <10uA*
*Average current in lowest power configuration
Safety Reverse Polarity Protection

 

MECHANICS / DESIGN

Dimensions 108 x 86 x 31 mm (4.25 x 3.39 x 1.22″)
Weight 161 g (5.68 oz)
Housing Ultra-Rugged IP67 Housing
IP Rating IP67 rated housing ensures device can withstand fine dust, high-pressure spray, submersion for 30 mins in 1m of water, and extreme temperatures
Installation Compact and concealable. Multiple installation options for covertly and easily securing the device to assets with screws, bolts, cable ties, rivets, and more. Stainless steel screws provided.
Operating Temperature -30°C to +60°C
For operation in extreme temperatures use LTC Batteries
Cellular Antenna Internal
GPS Antenna Internal
3-Axis Accelerometer 3-Axis Accelerometer to detect movement, high G-force events, and more
Diagnostic LED Diagnostic LED indicates operation status
Flash Memory Store weeks of records if device is out of cellular coverage. Storage capacity for over 1 month of continuous 30-second logging.
On-Board Speed and Heading Current speed and heading is reported with each position update
On-Board Temperature The device reports internal temperature which provides an indication of ambient temperature but may not always be precise

 

SMARTS

Auto-APN Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware
Battery Life Monitoring ‘Battery Low’ and ‘Battery Critical’ alert levels
Geofence Alerts The server can use device location to create geofences and alerts if an asset enters or leaves designated locations
Geofence Download to Device Geofences can be downloaded directly to the device from Telematics Guru for enhanced location-based actions and alerts. Maximum of 500 Geofences with up to 100 points per geofence.
Impact Detection Configure impact-detection alerts when G-forces are exceeded by a user-defined threshold
Intelligent Power Management Early registration abort saves power when out of cellular coverage
Periodic or Movement-Based Tracking Configure parameters to send updates based on set time intervals or when movement occurs. Adaptive tracking technology detects when the device is on the move and increases the update rate, providing detail when you need it while conserving battery when stationary.
Preventative Maintenance Set reminders based on distance traveled and run hours to reduce maintenance and repair costs
Run Hour Monitoring Capture run hours based on movement to understand and optimize asset utilization
Sleep Mode Stationary devices enter sleep mode until movement occurs to conserve battery life and optimize data usage
Theft Recovery Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval
Tip Detection & Rotation Counting Axis angle reporting, tip detection and rotation counting (planned)

 

DEVICE MANAGEMENT

Flexible Configuration Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application
Device Management Platform Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system
Configuration App Configurable with DMLink provisioning tool

 

INTEGRATION

Third-Party Integration TCP Direct or HTTPS Webhook

 

SECURITY

Data Security Military-level AES-256 Encryption from device to OEM Server to protect the integrity and confidentiality of telematics data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security.

 

WARRANTY

Manufacturer’s Warranty Two-year manufacturer’s warranty

 

CERTIFICATIONS

Please visit support.digitalmatter.com for a full list of certifications for this device

 

*Battery life estimates are influenced by several factors including temperature, installation and orientation of the device, the frequency of location updates, network coverage, sensor integrations, peripherals, accelerometer settings, and more. Battery life calculators are available at support.digitalmatter.com.

Let’s Get Started

Fill out the form below to discuss Digital Matter solutions, pricing and availability in your region.